Servo/tiller arm connector - tube and/or ends - SAILSetc

Servo to tiller arm connector - connector tube with or without the threaded ends. If using the threaded ends the length of tube required is 80 mm less than the distance between the axis of the rudder stock and the servo output shaft. The adjustable ends will give + or - 15 mm of adjustable length.

Ball joint connectors - pair. Pair of threaded end fittings, one left hand thread, one right hand thread designed to fit the alloy tube.  

Connector tube; 200 mm long. This is an alloy tube only - it is cut from an Easton 1616 arrow shaft - 6.3 mm outside diameter x 0.55 mm internal diameter.